Print

Spare parts Talsa H31 old range


Display per page
Sort by
1 - 50 of 74 results
Product no.: 00109

O-ring, Int. Diam. 18.72*2.62 (piston lock old Talsa H) (109)

6.50 *

In stock
can be shipped within 2 a 4 days

Product no.: 109

O-ring, Int. Diam. 18.72*2.62 (piston lock old Talsa H) (109)

6.50 *

In stock
can be shipped within 2 a 4 days

Product no.: 2898

O-ring int.diam 20*2 (2*knee lever H>02/2000) Talsa (2898)

 

8.50 *

In stock
can be shipped within 2 - 5 days

Product no.: 4013

O-ring, int. diam. 52*3 (tap filter oil reservoir grey plastic+S/S old H) Talsa 4013

6.00 *

In stock
can be shipped within 2 - 5 days

Product no.: 6238

Pack of 4 Piston O-Rings for Talsa H-31 Stuffer (6238)

Units per piston: 2 - Round profile

128.00 *

In stock
can be shipped within 4 days

Product no.: 07146

Seal, circular, lid silicone Talsa old H31, ext. diam. 334 mm (7146).

Outside diameter 334 mm.

52.00 *

In stock

Product no.: 6093

Pack of 3 green silicone gaskets for the lid of the Talsa H31p stuffer (6093)

Ext Diameter 334 mm. - Round profile.

128.00 *

In stock
can be shipped within 3 days

Product no.: 07698

Oil filling cap, green plastic, dipstick included (TALSA OLD H) - 7698

26.60 *

In stock
can be shipped within 2 - 5 days

Product no.: 07029

Piston retainning bolt-screw old Talsa H S/S M14*1.5 mm, without lower seal o-ring 

43.00 *

In stock
can be shipped within 2 - 5 days

Product no.: 07095

Talsa Nozzle/horn all S/S, short ext. diam.20mm*int.17mm L.use 200 mm (8") tube

Spare parts for sausage machines Talsa - New

51.00 *

In stock
can be shipped within 2 - 5 days

Product no.: 07094

Talsa Nozzle/horn all S/S, short ext. diam.12mm*int.10mm L.use 160 mm (6-1/4") tube

61.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7096

Talsa Nozzle/horn all S/S, short ext. diam.30mm*int.27mm L.use 200 mm (8") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7239

 Talsa Nozzle/horn all S/S, short ext. diam.15mm*int.12mm L.use 160 mm (6-1/4") tube

51.00 *

In stock
can be shipped within 2 - 5 days

Product no.: 7240

Spare parts for sausage machines Talsa

Nozzle/horn all S/S, short ext. diam.18mm*int.15mm L.use 200 mm8") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7020

Talsa Nozzle/horn all S/S, short ext. diam.43mm*int.40mm L.use 200 mm (8") tube

51.00 *

In stock
can be shipped within 3 a 6 days

Product no.: 7241

Talsa Nozzle/horn all S/S, short ext. diam.25mm*int.22mm L.use 200 mm (8") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7755

Talsa Nozzle/horn all S/S, short ext. diam.10mm*int.8mm L.use 160 mm (6-1/4") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 07060

Extracting wrench-screw for piston of fillers/stuffer olf Talsa H - 7060

44.50 *

In stock
can be shipped within 2-4 days

Product no.: 07454

Talsa Brass bushing. Talsa B11 B-25-32-25/40-4 with collar (knee old HP EXC H42) (7454)

19.90 *

In stock
can be shipped within 2 - 4 days

Product no.: 7010

Piston, Talsa old H31, aluminium, without o-rings  (7010).

Does not include o-rings. - Exploded code: 244.

315.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7333

Piston, S/S Talsa old H31S, without o-rings  (7333).

Does not include o-rings. - Exploded code: 244

499.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 0027

Brass bushing, B11 A-30-38-45 (aluminium lid Talsa old H26P/H31P) (0027).

For Talsa H26P and H31P hydraulic stuffers.

38.40 *

In stock
can be shipped within 3 a 6 days

Product no.: 00062

Pressure regulating valve SGRD03/G22/IR for Talsa stuffers (0062)

241.00 *

In stock
can be shipped within 2 - 5 days

Product no.: 7320

Internal fork, knee lever, S/S till01/2014 Talsa (7320)

39.90 *

In stock
can be shipped within 2 a 4 days

Product no.: 7319

Internal fork, knee lever activator S/S. till 01/2014 TALSA (7319)

39.90 *

In stock
can be shipped within 2 - 5 days

Product no.: 7032

Lid openning lever ,old H, wout green knob TALSA (7032)

30.50 *

In stock
can be shipped within 2 a 4 days

Product no.: 0136

Original spare parts for Talsa machines

Knob Green, M10 (OLD H, MIX) TALSA (0136)

13.60 *

In stock
can be shipped within 2 a 4 days

Product no.: 02585

Sleeve, green rubber SLEEVE, knee lever, old H TALSA (2585)

Talsa spare parts

29.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 07316

Horizontal knee lever shaft/bar, s/s, without green rubber sleeve (old H) talsa (7316)

42.50 *

In stock
can be shipped within 2 a 4 days

Product no.: 2467

 Board, front panel, pressure control, H lexan, green Talsa (2467)

Talsa spare parts news

15.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 2680

Sticker, round D.70 mm "aceite/oil" filling capold Talsa H Lexan (2680)

9.90 *

In stock
can be shipped within 2 a 4 days

Product no.: 2034

Talsa Cylindrical rubber foot, series T-30-10, black, single phase motors H/F

Talsa original spare parts

21.70 *

In stock
can be shipped within 2 a 4 days

Product no.: 7039

S/S special short! bolt M27, special fitted lid Talsa old H26PS/H31S all S/S - 7039

95.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7362

Talsa Noozle/horn all S/S, long, ext. diam.20*INT.17 L.use.280 mm (11") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7359

Talsa Noozle/horn all S/S, long, ext. diam.12*INT.10 L.use.240 mm (9 1/2") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7364

Talsa Noozle/horn all S/S, long, ext. diam.30*INT.27 L.use.280 mm (11") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7360

Spare parts for sausage machines Talsa - New

Talsa Noozle/horn all S/S, long, ext. diam.14*INT.12 L.use.240 mm (9 1/2") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7756

Talsa Nozzle/horn all S/S, long, ext. diam.10mm*int.8mm L.use.240mm (9 1/2") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7358

Spare parts for sausage machines Talsa - New

Talsa Nozzle/horn all S/S, short ext. diam.38mm*int.35mm L.use 200 mm (8") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7363

Talsa Noozle/horn all S/S, long, ext. diam.25*INT.22 L.use.280 mm (11") tube

Spare parts for sausage machines Talsa - New

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7365

Talsa Noozle/horn all S/S, long, ext. diam.38*INT.35 L.use.280 mm (11") tube

Spare parts for sausage machines Talsa - New

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 7445

Vertical shaft, old H P exc. H42/H52 knee lever from 02/00, 89mm, horizontal M Talsa 7445

88.70 *

In stock
can be shipped within 2 - 5 days

Product no.: 2014

Spare part for Talsa mixers

Wheel, D.80 mm (small/medium old H+MIX>1998) green nylon Talsa 2014

13.40 *

In stock
can be shipped within 2 a 4 days

Product no.: 4563

Talsa Nozzle/horn translucent D.EXT.20 INT.17L. use 196 mm (8") 

Talsa stuffers parts

24.20 *

In stock
can be shipped within 2 a 4 days

Product no.: 4562

Talsa stuffers parts - News

Talsa Nozzle/horn translucent D.EXT.14 INT.11L. use 160 mm (8")

24.20 *

In stock
can be shipped within 2 a 4 days

Product no.: 4564

H Series Parts - Talsa Stuffers

alsa Nozzle/horn translucent D.EXT.30 INT.27L. use 196 mm (8") 

 

 

24.20 *

In stock
can be shipped within 2 a 4 days

Product no.: 7361

Talsa Parts - Sausage Stuffers

Talsa Noozle/horn all S/S, long, ext. diam.18*INT.15 L.use.280 mm (11") tube

51.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 2580

Special flat stainless steel washer M16 DIN9021 D.16,7 * D.50 * 3 oil drain plug H Talsa

2.95 *

In stock
can be shipped within 2 a 4 days

Product no.: 07048

Funnel holder nut open, aluminum (old H, PH500 fillers) Talsa - (7048)

65.00 *

In stock
can be shipped within 2 a 4 days

Product no.: 35

Talsa Parts for Sausage Stuffers

Talsa Motor, 1-phase H/F 1*225V-50HZ-1.75HP-1,3KW-1420, capacitor 40MF

438.00 *

In stock
can be shipped within 2 a 4 days

*
Prices incl. VAT, plus delivery
1 - 50 of 74 results